From the beginning, it has been exciting to watch the growing number of packages developing in the torch
ecosystem. What’s amazing is the variety of things people do with torch
: extend its functionality; integrate and put to domain-specific use its low-level automatic differentiation infrastructure; port neural network architectures … and last but not least, answer scientific questions.
This blog post will introduce, in short and rather subjective form, one of these packages: torchopt
. Before we start, one thing we should probably say a lot more often: If you’d like to publish a post on this blog, on the package you’re developing or the way you employ R-language deep learning frameworks, let us know – you’re more than welcome!
torchopt
torchopt
is a package developed by Gilberto Camara and colleagues at National Institute for Space Research, Brazil.
By the look of it, the package’s reason of being is rather self-evident. torch
itself does not – nor should it – implement all the newly-published, potentially-useful-for-your-purposes optimization algorithms out there. The algorithms assembled here, then, are probably exactly those the authors were most eager to experiment with in their own work. As of this writing, they comprise, amongst others, various members of the popular ADA* and *ADAM* families. And we may safely assume the list will grow over time.
I’m going to introduce the package by highlighting something that technically, is “merely” a utility function, but to the user, can be extremely helpful: the ability to, for an arbitrary optimizer and an arbitrary test function, plot the steps taken in optimization.
While it’s true that I have no intent of comparing (let alone analyzing) different strategies, there is one that, to me, stands out in the list: ADAHESSIAN (Yao et al. 2020), a second-order algorithm designed to scale to large neural networks. I’m especially curious to see how it behaves as compared to L-BFGS, the second-order “classic” available from base torch
we’ve had a dedicated blog post about last year.
The way it works
The utility function in question is named test_optim()
. The only required argument concerns the optimizer to try (optim
). But you’ll likely want to tweak three others as well:
test_fn
: To use a test function different from the default (beale
). You can choose among the many provided intorchopt
, or you can pass in your own. In the latter case, you also need to provide information about search domain and starting points. (We’ll see that in an instant.)steps
: To set the number of optimization steps.opt_hparams
: To modify optimizer hyperparameters; most notably, the learning rate.
Here, I’m going to use the flower()
function that already prominently figured in the aforementioned post on L-BFGS. It approaches its minimum as it gets closer and closer to (0,0)
(but is undefined at the origin itself).
Here it is:
flower <- function(x, y) {
a <- 1
b <- 1
c <- 4
a * torch_sqrt(torch_square(x) + torch_square(y)) + b * torch_sin(c * torch_atan2(y, x))
}
To see how it looks, just scroll down a bit. The plot may be tweaked in a myriad of ways, but I’ll stick with the default layout, with colors of shorter wavelength mapped to lower function values.
Let’s start our explorations.
Why do they always say learning rate matters?
True, it’s a rhetorical question. But still, sometimes visualizations make for the most memorable evidence.
Here, we use a popular first-order optimizer, AdamW (Loshchilov and Hutter 2017). We call it with its default learning rate, 0.01
, and let the search run for two-hundred steps. As in that previous post, we start from far away – the point (20,20)
, way outside the rectangular region of interest.
library(torchopt)
library(torch)
test_optim(
# call with default learning rate (0.01)
optim = optim_adamw,
# pass in self-defined test function, plus a closure indicating starting points and search domain
test_fn = list(flower, function() (c(x0 = 20, y0 = 20, xmax = 3, xmin = -3, ymax = 3, ymin = -3))),
steps = 200
)
![Minimizing the flower function with AdamW. Setup no. 1: default learning rate, 200 steps.](https://blogs.rstudio.com/tensorflow/posts/images/adamw-default-lr.png)
Whoops, what happened? Is there an error in the plotting code? – Not at all; it’s just that after the maximum number of steps allowed, we haven’t yet entered the region of interest.
Next, we scale up the learning rate by a factor of ten.
![Minimizing the flower function with AdamW. Setup no. 1: default learning rate, 200 steps.](https://blogs.rstudio.com/tensorflow/posts/images/adamw-lr-0.1.png)
What a change! With ten-fold learning rate, the result is optimal. Does this mean the default setting is bad? Of course not; the algorithm has been tuned to work well with neural networks, not some function that has been purposefully designed to present a specific challenge.
Naturally, we also have to see what happens for yet higher a learning rate.
![Minimizing the flower function with AdamW. Setup no. 3: lr = 0.7, 200 steps.](https://blogs.rstudio.com/tensorflow/posts/images/adamw-lr-0.7.png)
We see the behavior we’ve always been warned about: Optimization hops around wildly, before seemingly heading off forever. (Seemingly, because in this case, this is not what happens. Instead, the search will jump far away, and back again, continuously.)
Now, this might make one curious. What actually happens if we choose the “good” learning rate, but don’t stop optimizing at two-hundred steps? Here, we try three-hundred instead:
![Minimizing the flower function with AdamW. Setup no. 3: lr](https://blogs.rstudio.com/tensorflow/posts/images/adamw-lr-0.1-steps-300.png)
Interestingly, we see the same kind of to-and-fro happening here as with a higher learning rate – it’s just delayed in time.
Another playful question that comes to mind is: Can we track how the optimization process “explores” the four petals? With some quick experimentation, I arrived at this:
![Minimizing the flower function with AdamW, lr = 0.1: Successive “exploration” of petals. Steps (clockwise): 300, 700, 900, 1300.](https://blogs.rstudio.com/tensorflow/posts/images/petals.png)
Who says you need chaos to produce a beautiful plot?
A second-order optimizer for neural networks: ADAHESSIAN
On to the one algorithm I’d like to check out specifically. Subsequent to a little bit of learning-rate experimentation, I was able to arrive at an excellent result after just thirty-five steps.
![Minimizing the flower function with AdamW. Setup no. 3: lr](https://blogs.rstudio.com/tensorflow/posts/images/adahessian-steps-35.png)
Given our recent experiences with AdamW though – meaning, its “just not settling in” very close to the minimum – we may want to run an equivalent test with ADAHESSIAN, as well. What happens if we go on optimizing quite a bit longer – for two-hundred steps, say?
![Minimizing the flower function with ADAHESSIAN. Setup no. 2: lr = 0.3, 200 steps.](https://blogs.rstudio.com/tensorflow/posts/images/adahessian-steps-200.png)
Like AdamW, ADAHESSIAN goes on to “explore” the petals, but it does not stray as far away from the minimum.
Is this surprising? I wouldn’t say it is. The argument is the same as with AdamW, above: Its algorithm has been tuned to perform well on large neural networks, not to solve a classic, hand-crafted minimization task.
Now we’ve heard that argument twice already, it’s time to verify the explicit assumption: that a classic second-order algorithm handles this better. In other words, it’s time to revisit L-BFGS.
Best of the classics: Revisiting L-BFGS
To use test_optim()
with L-BFGS, we need to take a little detour. If you’ve read the post on L-BFGS, you may remember that with this optimizer, it is necessary to wrap both the call to the test function and the evaluation of the gradient in a closure. (The reason being that both have to be callable several times per iteration.)
Now, seeing how L-BFGS is a very special case, and few people are likely to use test_optim()
with it in the future, it wouldn’t seem worthwhile to make that function handle different cases. For this on-off test, I simply copied and modified the code as required. The result, test_optim_lbfgs()
, is found in the appendix.
In deciding what number of steps to try, we take into account that L-BFGS has a different concept of iterations than other optimizers; meaning, it may refine its search several times per step. Indeed, from the previous post I happen to know that three iterations are sufficient:
![Minimizing the flower function with L-BFGS. Setup no. 1: 3 steps.](https://blogs.rstudio.com/tensorflow/posts/images/lbfgs-steps-3.png)
At this point, of course, I need to stick with my rule of testing what happens with “too many steps.” (Even though this time, I have strong reasons to believe that nothing will happen.)
![Minimizing the flower function with L-BFGS. Setup no. 2: 10 steps.](https://blogs.rstudio.com/tensorflow/posts/images/lbfgs-steps-10.png)
Hypothesis confirmed.
And here ends my playful and subjective introduction to torchopt
. I certainly hope you liked it; but in any case, I think you should have gotten the impression that here is a useful, extensible and likely-to-grow package, to be watched out for in the future. As always, thanks for reading!
Appendix
test_optim_lbfgs <- function(optim, ...,
opt_hparams = NULL,
test_fn = "beale",
steps = 200,
pt_start_color = "#5050FF7F",
pt_end_color = "#FF5050FF",
ln_color = "#FF0000FF",
ln_weight = 2,
bg_xy_breaks = 100,
bg_z_breaks = 32,
bg_palette = "viridis",
ct_levels = 10,
ct_labels = FALSE,
ct_color = "#FFFFFF7F",
plot_each_step = FALSE) {
if (is.character(test_fn)) {
# get starting points
domain_fn <- get(paste0("domain_",test_fn),
envir = asNamespace("torchopt"),
inherits = FALSE)
# get gradient function
test_fn <- get(test_fn,
envir = asNamespace("torchopt"),
inherits = FALSE)
} else if (is.list(test_fn)) {
domain_fn <- test_fn[[2]]
test_fn <- test_fn[[1]]
}
# starting point
dom <- domain_fn()
x0 <- dom[["x0"]]
y0 <- dom[["y0"]]
# create tensor
x <- torch::torch_tensor(x0, requires_grad = TRUE)
y <- torch::torch_tensor(y0, requires_grad = TRUE)
# instantiate optimizer
optim <- do.call(optim, c(list(params = list(x, y)), opt_hparams))
# with L-BFGS, it is necessary to wrap both function call and gradient evaluation in a closure,
# for them to be callable several times per iteration.
calc_loss <- function() {
optim$zero_grad()
z <- test_fn(x, y)
z$backward()
z
}
# run optimizer
x_steps <- numeric(steps)
y_steps <- numeric(steps)
for (i in seq_len(steps)) {
x_steps[i] <- as.numeric(x)
y_steps[i] <- as.numeric(y)
optim$step(calc_loss)
}
# prepare plot
# get xy limits
xmax <- dom[["xmax"]]
xmin <- dom[["xmin"]]
ymax <- dom[["ymax"]]
ymin <- dom[["ymin"]]
# prepare data for gradient plot
x <- seq(xmin, xmax, length.out = bg_xy_breaks)
y <- seq(xmin, xmax, length.out = bg_xy_breaks)
z <- outer(X = x, Y = y, FUN = function(x, y) as.numeric(test_fn(x, y)))
plot_from_step <- steps
if (plot_each_step) {
plot_from_step <- 1
}
for (step in seq(plot_from_step, steps, 1)) {
# plot background
image(
x = x,
y = y,
z = z,
col = hcl.colors(
n = bg_z_breaks,
palette = bg_palette
),
...
)
# plot contour
if (ct_levels > 0) {
contour(
x = x,
y = y,
z = z,
nlevels = ct_levels,
drawlabels = ct_labels,
col = ct_color,
add = TRUE
)
}
# plot starting point
points(
x_steps[1],
y_steps[1],
pch = 21,
bg = pt_start_color
)
# plot path line
lines(
x_steps[seq_len(step)],
y_steps[seq_len(step)],
lwd = ln_weight,
col = ln_color
)
# plot end point
points(
x_steps[step],
y_steps[step],
pch = 21,
bg = pt_end_color
)
}
}